Zenex HID Ballast Inspection/Taken Apart




People Who Liked This Video Also Liked

Zenex HID Ballast Inspection/Taken Apart
Zenex HID Ballast Inspection/Taken Apart
Zenex HID Review
Zenex HID Review
REVIEW $24 HID KIT FROM EBAY
REVIEW $24 HID KIT FROM EBAY
Xentec HID Ballast vs v.vme HID Ballast  hid's .dont buy Xentec HID .. bulbs
Xentec HID Ballast vs v.vme HID Ballast hid's .dont buy Xentec HID .. bulbs
Zenex HID Kit Unboxing 9004/9007 High Low Beam 6000k
Zenex HID Kit Unboxing 9004/9007 High Low Beam 6000k

Did this video help you?

Mason Gilbert: That's not rubber, and its purpose is not electrical isolation ("insulation"). It's epoxy sealant, and it's there to make the ballast impervious to both vibration and water. I am impressed, though. Look, if you're going to pose as some sort of "authority" on HID products on youtube, you really should have known this.

Jon F: i have a McCulloch kit since 2010 and 1 ballast finally gave out so saw the Zenex on Amazon for under $25 so we'll see what happens

DanielRichards644: I picked up a pair of these ballasts off amazon for 40 bucks, couldn't do a whole kit because I needed a D2S bulb which was only available from Morimoto but I've been running them about 3 weeks now (since I finally gathered the rest of the materials I needed to complete the retrofit) and they seam damn good for the money if you ask me.

Tim Caprito: Have you installed it on your car? I don't have projector covers or whatever you want to call it, but i was thinking of aiming my headlights lower than FORD recommends. I would think that wouldn't blind oncommming traffic as much. With the brightness I got (8000k Iceburg), I wouldn't see a problem with brightness then. Do you think this would work. I have an 03 ford taurus

sulii ff: Do you recommend to buy this product or not
Rating:
Zenex HID Ballast Inspection/Taken Apart 5 out of 5

Featured Video

Video How to Guide

Latest Comments

Mason Gilbert: That's not rubber, and its purpose is not electrical isolation ("insulation"). It's epoxy sealant, and it's there to make the ballast impervious to both vibration and water. I am impressed, though. Look, if you're going to pose as some sort of "authority" on HID products on youtube, you really should have known this.
moster 56: build a wing coster
Lenox: Die Arty war schon offen aber naja
Milena Muñoz: i want to put skins by my yp-s3 i search a lot and i dont find anything i like to put games too anybody knows how i can do that plizz help!
Solskjaer: Уродливый азиатский обмылок из фольги с паршивой шумкой и ЛКП! Хонда сдулась на Российском рынке...
nelson thomas: fight the fist fist
Benjamin Haigh: Nice succinct video, very helpful. Thanks very much.

Zenex HID Ballast Inspection/Taken Apart